Steca Solarix PLI 3KVA 24V Hybrid Solar Inverter With MPPT Solar Charge Controller

  • True sine wave voltage
  • High overload capacity
  • Integrated MPP tracker
  • Multistage charging technology
SKU: FSI 40032 Category:

Description

The Steca Solarix PLI is the first product from Steca Elektronik to offer an all-in-one package. It allows users to supply consumers with 230 VAC power, charges the battery with an integrated MPPT charge controller, and at the same time permits connection to a generator or an available electricity grid.
Everything in a single device.
This means that solar energy can be used as the top priority, for example. And if that isn’t enough, a generator can be started or the supply can be switched to the public grid. At the same time, the battery can also be recharged by either the generator or the grid. Given its very quick switchover time of up to 10 ms and its flexible energy priority selection, the Solarix PLI also acts as an
uninterruptible power supply.
Even difficult consumers, such as large AC motors, can be started reliably with dual overload capacity. The maximum power point tracker in the integrated charge controller ensures that, even in adverse weather conditions, the maximum output is obtained from the PV modules in order to optimally charge the battery and supply the consumers with power at the same time.

 

Additional information

Amps

40A

Brand

Steca

Inverter Type

High Frequency, Hybrid, Inverter Inbuilt Solar Charge Controller

Volt

220V, 230V, 24V, Single-Phase

Watts

3 KVA

Features

Product features

  • True sine wave voltage
  • High overload capacity
  • Integrated MPP tracker
  • Multistage charging technology
  • Monthly equalisation charge
  • Auxiliary contact for starting the generator
  • Adjustable cut-off voltages
  • Battery type: gel / liquid lead battery
  • Lightweight construction
  • Easy installation

Electronic protection functions

  • Overcharge protection
  • Reverse polarity protection of modules, for battery via fuse
  • Deep discharge protection
  • Short circuit protection of load and module
  • Reverse polarity protection by internal fuse
  • Reverse current protection at night
  • Overtemperature and overload protection
  • Acoustic alarm
  • PE connection

Displays

  • Graphical LC display
  • 3 multi-coloured LEDs show operating states

Operation

  • Simple menu-driven operation
  • Programming by buttons

Interfaces

  • RS-232 serial interface to PC
  • Connection to PC via USB

Options

  • Interconnectable in parallel or in three phases (parallel kit required)

Certificates

  • Compliant with European Standards (CE)
  • RoHS compliant
  • Manufactured according to ISO 9001 and ISO 14001

Accessories

  • PC software is enclosed

Technical Data

3KVA-24V 5KVA-48V
Characterisation of the operating performance
System voltage
24 V
48 V
Continuous power
3000 VA
5000 VA
Power 5 sec.
6000 VA
10000 VA
Max. efficiency sine wave
> 91 %
> 93 %
Max. efficiency charge controller
> 98 %
Own consumption standby
14.0 W
15.0 W
Own consumption ON
45.0 W
50.0 W
Input side
Input voltage
90 V AC … 280 V AC
Max. current on transfer system
30 A
40 A
Input frequency
40 … 65 Hz
50 / 60 Hz (automatic detection)
Transfer time
10 ms typical (UPS mode)
AC output side
Output voltage
220 V AC … 240 V AC +/-5 %
230 V AC +/-5 %
Output frequency
50 / 60 Hz
Battery side
Battery voltage
20 V … 30 V
38.4 V … 66 V
Max. charge current of PV
40 A
80 A
Max. charge current of AC
60 A (programmable)
End of charge voltage
27.0 V (programmable)
54.0 V (programmable)
Boost charge voltage
28.2 V (programmable)
56.4 V (programmable)
Equalisation charge
29.2 V (programmable)
60.0 V (programmable)
Set battery type
liquid (programmable)
DC input side charge controller
Min. MPP voltage
30 V
60 V
Max. MPP voltage
80 V
115 V
Min. open circuit voltage solar module / input (at minimum operating temperature)
36 V
72 V
Max. open circuit voltage solar module / input (at minimum operating temperature)
100 V
145 V
Max. module current
40 A
80 A
Nominal charge power
1168 W
4800 W
Own consumption
< 2 W
Operating conditions
Operating temperature
0 °C … + 55 °C
Storage temperature
– 15 °C … + 60 °C
Rel. humidity
< 95 %, non-condensing
Maximum altitude
2000 a.s.l
Fitting and construction
Terminal (AC – fine / single wire)
8 mm² – AWG 8
Terminal (PV – fine / single wire)
8 mm² – AWG 8
12 mm² – AWG 6
Battery connection
(M6 ring terminal included)
35 mm² … 50 mm²
AWG 2 … AWG 0
Double throw signal contact
3 A / 250 V AC (max. 150 W)
3 A / 30 V DC
Degree of protection
IP 21
Dimensions (X x Y x Z)
275 x 385 x 114 mm
298 x 469 x 130 mm
Weight
7,6 kg
11,5 kg
Cooling principle
fan

Reviews

There are no reviews yet.

Be the first to review “Steca Solarix PLI 3KVA 24V Hybrid Solar Inverter With MPPT Solar Charge Controller”

Your email address will not be published. Required fields are marked *